Device - HTTPs Web Configurator Tunnels
Posted: Tue Mar 15, 2022 8:12 pm
Operating the Web Configurator Redirecting Tunnel
You have 1 main requirements for this feature to work.
Here is how it works.
Launch the Redirection control
Select to manage Firewall and give some type of consent when prompted
Give it a few seconds to connect, accept the SSL error notice.
Go ahead and log in when page is loaded
You should now be logged in and able to use the interface.
Once completed close the Web browser and then close the tunnel using the close control
You have 1 main requirements for this feature to work.
- The PC you are using to access the Automate Control Center and this plugin must be a part of your Automate environment. This means it needs to have an installed and functional agent running for redirectors to operate correctly with your PC.
Here is how it works.
Launch the Redirection control
Select to manage Firewall and give some type of consent when prompted
Give it a few seconds to connect, accept the SSL error notice.
Go ahead and log in when page is loaded
You should now be logged in and able to use the interface.
Once completed close the Web browser and then close the tunnel using the close control