Awesome, thanks for all the helpful info! I poked around some more and found a bit out:
I ran the python script manually, and it looks like it spewed out all the CIM data we'd expect. It also ran super quickly - took just a few seconds:
I also did a 'rescan host' from the ESX main screen. Looking at the logs, the initial status report and the CIM data seem to be returned as well. Here are the three 'info' messages from the script:
Code: Select all
CIM SQL -> [ ( 3 , 3 , 846 , '10.10.10.2' , ' Chassis', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' unknown', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 7:1', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' Add-in Card 11:1', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' Add-in Card 11:2', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' Add-in Card 11:3', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' Hardware Management Controller (Node 0)', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 SYS Usage', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 MEM Usage', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 IO Usage', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 CPU Usage', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 Temp', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 Pwr Consumption', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 Fan1', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 Inlet Temp', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' CPU1 Level-1 Cache', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' CPU1 Level-2 Cache', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' CPU1 Level-3 Cache', '0')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' CPU1', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' IPMI SEL', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 4: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 4: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 3: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 3: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 2: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 2: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 1: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 B 1: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 8: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 8: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 7: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 7: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 6: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 6: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 5: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 5: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 4: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 4: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 3: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 3: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 2: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 2: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 1: Uncorrectable ECC', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Memory Device 1 A 1: Correctable ECC logging limit reached', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: NMI/Diag Interrupt', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: Bus Timeout', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: I/O Channel check NMI', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: Software NMI', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: PCI PERR', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: PCI SERR', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: EISA failsafe timeout', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: Bus Correctable error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PCIe Slot3 0: Bus Uncorrectable error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 OS Watchdog 0: Timer expired', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 OS Watchdog 0: Hard reset', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 OS Watchdog 0: Power down', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 OS Watchdog 0: Power cycle', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 Intrusion 0: General Chassis intrusion', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Add-in Card 1 ROMB Battery 0: Low', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Add-in Card 1 ROMB Battery 0: Failed', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 CMOS Battery 0: Low', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 CMOS Battery 0: Failed', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 2 Status 0: IERR', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 2 Status 0: Thermal Trip', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 2 Status 0: Configuration Error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 Status 0: IERR', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 Status 0: Thermal Trip', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 Status 0: Configuration Error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 VGA Cable Pres 0: Config Error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 USB Cable Pres 0: Connected', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 USB Cable Pres 0: Config Error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 LCD Cable Pres 0: Config Error', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 DIMM PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PS2 PG Fail 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 PS1 PG Fail 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 1.5V PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 FIVR PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 1.5V AUX PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 2.5V AUX PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 1.05V PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 M23 VPP PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 VCORE PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 5V SWITCH PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 M01 VPP PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 M23 VDDQ PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 5V AUX PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 VCCIO PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' System Board 1 3.3V PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 M23 VDDQ PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 M23 VTT PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Processor 1 M01 VTT PG 0', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Fan1', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Power Supply 1', '2')
,( 3 , 3 , 846 , '10.10.10.2' , ' Power Supply 2', '2')
]
It also looks like all the CIM data is there. I did notice there were two "ESXHost" values for that one ProbeID - one for 10.10.10.2 (which we'd expect) and another from an old host. Out of pure reckless abandon, I deleted everything out of the _cimdata table where ProbeID=846. Rescanned, confirmed the _cimdata table was populated with new info... but the CIM window is still blank in the plugin
As a last-ditch effort, I ran our Control Center reset script, which basically deletes some registry values, as well as the "c:\programdata\Labtech Plugins" and "C:\ProgramData\Labtech Client\Cache" folder. But alas, still no data in the CIM menu.