Device - HTTPs Web Configurator Tunnels

This forum is for the description and instruction on how plugin works and should be used.
Post Reply
User avatar
Cubert
Posts: 2430
Joined: Tue Dec 29, 2015 7:57 pm
8
Contact:

Device - HTTPs Web Configurator Tunnels

Post by Cubert »

Operating the Web Configurator Redirecting Tunnel

You have 1 main requirements for this feature to work.
  • The PC you are using to access the Automate Control Center and this plugin must be a part of your Automate environment. This means it needs to have an installed and functional agent running for redirectors to operate correctly with your PC.
The Web Configurator function allows you to open up a SOCKS tunnel between you and an end agent able to access the web portal at the location of the firewall. This tunnel is proxied by the ConnectWise provided and hosted proxy servers and is a built in function of Automate.

Here is how it works.



Launch the Redirection control

WebConfiguratorForm.jpg
WebConfiguratorForm.jpg (23.08 KiB) Viewed 7278 times


Select to manage Firewall and give some type of consent when prompted

WebConfigurator-give-consent.jpg
WebConfigurator-give-consent.jpg (33.16 KiB) Viewed 7278 times



Give it a few seconds to connect, accept the SSL error notice.

WebConfigurator-newPage.jpg
WebConfigurator-newPage.jpg (103.93 KiB) Viewed 7278 times


Go ahead and log in when page is loaded

WebConfigurator-newPageLogon.jpg
WebConfigurator-newPageLogon.jpg (157.67 KiB) Viewed 7278 times


You should now be logged in and able to use the interface.
WebConfigurator-loggedin.jpg
WebConfigurator-loggedin.jpg (224.42 KiB) Viewed 7278 times


Once completed close the Web browser and then close the tunnel using the close control

WebConfigurator-Redirect-status.jpg
WebConfigurator-Redirect-status.jpg (45.95 KiB) Viewed 7278 times

Post Reply

Return to “Documentation Project”