Main Tool

This forum contains the documentation for the Bitlocker for Automate plugin
Post Reply
User avatar
Cubert
Posts: 2430
Joined: Tue Dec 29, 2015 7:57 pm
8
Contact:

Main Tool

Post by Cubert »

The main control is located under each clients console as a tab called BitLocker.

Here it shows all drives that Automate sees for each agent and the current status of that drives encryption. You then use the tools to the right to add Key Protectors to drives. You can add more than one protector to a drive. You can add, remove, suspend encryption on any drive.

ClientConsole.PNG
ClientConsole.PNG (71.07 KiB) Viewed 2162 times

User avatar
Cubert
Posts: 2430
Joined: Tue Dec 29, 2015 7:57 pm
8
Contact:

Re: Main Tool

Post by Cubert »

Adding a Key Protector


To add encryption to a drive is easy. Select the drive from the list of agents in the plugin, right click to open menu, select Add Protector from the menu. This will launch a new window that you can select a key protector and encryption size to apply to the drive. TPM is the most common key protector so we will use this as our example. As long as the agent supports TPM then this key will work. If not the terminal will test to see and report back any non compliance before quitting. If all was successful then the terminal should close it's self automatically. You should not need to quit the window manually.

Adding-TPM-key-protector.png
Adding-TPM-key-protector.png (54.87 KiB) Viewed 1441 times


Here is what happens if TPM is attempted on a system that can not support TPM.

TPM-failed test.png
TPM-failed test.png (17.81 KiB) Viewed 1441 times

Post Reply

Return to “BitLocker Documentation Project”